Omaha Lincoln Des Moines

Appliance Repair Dallas Center Iowa

Nebraska Home Appliance Rated out of 5 stars based on 0 customer reviews

We serviced a
SAMSUNG REFRIGERATOR
Model RF28HFEDBSR/AA
Near Dallas Center, IA 50063
Jeff
Job Details: 08/19/2021
Customer states that her ice maker is not working. Temps looked good at 37 in fresh food and -2 in the freezer. Ice and frost present on the ice maker. No error codes.Performed ice maker update under Samsung warranty. Also cleaned condenser and helped customer remove glass shelf on bottom of refrigerator. Tested ice maker and heard water entering. Job completed.Please allow 4 hours for ice to form. Thanks for choosing Nebraska Home Appliance!; dspstn on spec-tagged invntry: 1 DA81-05595A RTV OEM DOW 3140 and 1 DA82-02704A ICEMKR UPDATE
We serviced a
SAMSUNG REFRIGERATOR
Model RB10FSR4ESR/AA
Near Dallas Center, IA 50063
Dillon
Job Details: 08/03/2021
Customer complaint is that there were dents on both of the doors. I took both of the doors off after taking pictures and found dents. I then put both of the new doors on and found that there were no dents on any of the new doors. Customer had unit unplugged when I showed up so I left unit unplugged. Job complete.
We serviced a
SAMSUNG REFRIGERATOR
Model RF23M8070SR/AA
Near Dallas Center, IA 50063
Jason
Job Details: 06/02/2021
"Customer's complaint was that their water pitcher had been leaking from the seal when they poured a glass of water, pitcher was replaced as well as their water filter.; used 1 DA97-17376B (FILTER) from stock"
We serviced a
SAMSUNG RANGES/COOKTOP E
Model NE58F9500SS/AA
Near Dallas Center, IA 50063
Dillon
Job Details: 05/12/2021
"Customer complaint is that the cooktop had cracked out on them. Found out theres a huge crack right along the top of the cooktop, I then disassembled the unit and pulled the old cooktop off. And then put in the new cooktop in assembled everything back together and push the unit back into it spot, I then turn power back onto the unit and turned all the burners on and check to see if the oven would be correctly. Found that everything is operating properly at this time, job complete"