Appliance Repair Colon Nebraska

Nebraska Home Appliance Rated 5.0 out of 5 stars based on 1 customer reviews

We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHZ
Near Colon, NE 68018
Ali
Job Details: 08/02/2022
Removed the old freezer door assembly and installed the new door assembly. Confirmed the wiring and water lines were in its proper location. Made sure the door was sealing properly. Finally ran a cup of water and confirmed there wasnt any leaks. Unit is now operating properly.Job complete Thanks for choosing Nebraska Home Appliance. . Ali!
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHZ
Near Colon, NE 68018
Ali
Job Details: 05/04/2022
"During inspection the ice tray was frozen and unable to removed it. I did noticed ice buildup towards the back of the door. Steamed out all of the ice buildup and removed the ice tray. Once the tray was removed I noticed more ice buildup towards the back of the door near the ice maker assembly. Steamed out all of the ice buildup and dried everything. Ran the unit in a diagnostic mode and cycled the ice maker assembly. During the fill water was leaking behind the spout that fills the ice. That part is sealed within the door. Unit will need a new door assembly to fix the leak. If approved office will call to reschedule once the parts have been received. Thanks for choosing Nebraska Home Appliance. . Ali! ; ordrng 1 W11109888 (ICE-CONTNR) and 1 LW11202405 (DOR-FIP), dspstn on spec-tagged invntry: 1 819043 HEAT-PROBE DEF DRAIN 1 W10316760 THERMISTOR , and 1 W10873791 ICEMKR"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS312SNHM
Near Colon, NE 68018
Kevin
Job Details: 02/09/2022
"Door cam worn, top and bottom replaced"
We serviced a
SAMSUNG DRYER
Model DV48J7700EW/A2
Near Colon, NE 68018
Kevin
Job Details: 11/03/2021
Found idler melted and falling off. Gave est for belt and idler customer oked. Replaced belt and idler. ; dspstn on spec-tagged invntry: 1 6602-001655 BELT ( M ONLY ) and 1 DC93-00634A IDLER ASM
We serviced a
MAYTAG WASHER
Model WTW4816FW1
Near Colon, NE 68018
Ali
Job Details: 06/08/2021
"During inspection ran the unit in a spin and drain cycle. During the cycle the unit had the distinct noise of the bearing within the gear case going out. With the bearing going out it isnt allowing the unit to go into a full spin speed. Unit will need a new gear case assembly which includes and new gear case, cam set, and belt. Due to the cost of the repair customer is going to purchase a new unit.Job complete Thank you for choosing NHA be sure to leave us a google review! Ali! ; dspstn on spec-tagged invntry: 1 W10913953 ACTUATOR and 1 W11307244 LID LOCK LATCH ASM 3 WIRE"
Andy
Colon, Nebraska
11/04/2021
Kevin was very knowledgeable, polite and quick on the fix.
Overall Experience