Ali

Nebraska Home Appliance Rated 5.0 out of 5 stars based on 222 customer reviews

We serviced a
LG REFRIGERATOR
Model LSXS26366D/02
Near Lincoln, NE 68521
Ali
Job Details: 03/23/2023
"Tapped into system and got high side pressure at 45.4 and low side at 36.5 indicating a failed compressor. I reclaimed a full charge worth of refrigerant. Unit will need the compressor, and drier replaced. I removed old compressor and drier from unit. I then installed and welded in new compressor and drier. Then proceeded to pressurize system with nitrogen to 200psi. I checked all welds with bubble leak detector and no leaks were found. Next I vacuumed down the system for 20 minutes and achieved a 529 micron vacuum. I updated main pcb software for new compressor. After removing vacuum, pump the vacuum settled out at 925 microns. Vacuum holding steady. I then recharged system with 6.17 oz of r134 a refrigerant. Unit is now running and beginning to blow cold air. Allow 24 hours for unit to cycle temps back down to normal. Job complete. Ali! ; dspstn on spec-tagged invntry: 1 ADH73150210 DRIER UV 1 ADL74760901 EVAP , and 1 TCA38151706 R134 CMPRSR R134"
We serviced a
GE DISHWASHER
Model GDF550PSR6SS
Near Lincoln, NE 68503
Ali
Job Details: 03/23/2023
Unit is installed in a new apartment complex. While I was waiting for a generator I noticed the plugs for the side mount option was installed backwards causing the door not to close properly. Fixed the plugs and once I had power I tested the unit. Ran multiple cycles without any leaks. Unit is now operating properly.Job complete Ali!
We serviced a
FRIGIDAIRE DRYER
Model AEQB6000ES2
Near Adams, NE 68301
Ali
Job Details: 03/23/2023
"Installed the new heating element and rear bearing assembly. Reassembled the unit and ran a timed dry high heat. Unit is now operating properly.Job complete Ali! ; dspstn on spec-tagged invntry: 1 131825900 BEARING,DRUM SUPPORT and 1 WF3CB PURE SOURCE 3 CS1"
We serviced a
KITCHENAID DISHWASHER
Model KDPE234GPS0
Near Murray, NE 68409
Ali
Job Details: 03/23/2023
During inspection of the unit would not heat during a cycle. I ran the unit in a diagnostic mode to calibrate the system. While it was doing the calibration I checked amperage to confirm the heater activated. Unit pulled over 7amps. Once the calibration was done I ran a normal cycle and heater was being activated. Unit also had a broken bracket that was causing the top rack to pop off. Unit will need a new rack bracket assembly. Once the parts have been received office will call to reschedule. Ali! ; ordrng 1 WPW10546503 (ADJUSTER) and 2 WPW10195840 (POSITIONER)s and 2 WPW10195839 (Slides)s and 1 WPW10588165 (Housing) and 1 WPW10250162 (Cover)
We serviced a
WOLF COFFEE MAKER
Model EC24S
Near Lincoln, NE 68526
Ali
Job Details: 03/22/2023
Unit would not heat the coffee up properly. Ran the unit in a descaling process and adjusted the energy saver mode. Confirmed with the customers that the coffee was at the proper temperature. With the unit being in a showroom recommended descaling the unit more often then what is recommended by Wolf. Unit is now operating properly.Job complete Ali!
Kelly Rippe
Syracuse, Nebraska
02/28/2023
Thankful, I found Nebraska Home Appliance! The service was timely and the pricing fair. Ali the technician was well trained and so pleasant to deal with !
Overall Experience
Gdub
Seward, Nebraska
02/27/2023
Overall Experience
Laura
Hickman, Nebraska
02/24/2023
Ali is wonderful. He was prompt, professional, competent and a really nice person. We truly enjoyed having him in our home. And he fixed our fridge!
Overall Experience
Christine S
Lincoln, Nebraska
02/23/2023
Ali was very considerate of my time and was able to find the source of the problem and get it fixed quickly! He even offered tips that will extend the life of my appliance!
Overall Experience
Lincoln, Nebraska
02/17/2023
It was a great experience very knowledgeable ali
Overall Experience